How to remove virus from computer without using antivirus

Computer virus is a program or piece of code that is loaded onto your computer without your knowledge and runs against your wishes.

Viruses can also replicate themselves.
All computer viruses
are man-made. A simple virus that can
make a copy of itself over and over again
is relatively easy to produce. Even such
a simple virus is dangerous because it
will quickly use all available memory and bring the system to a halt. An even more dangerous type of virus is one capable of transmitting itself across networks and bypassing security systems.

One of the ways by which a virus can infect your PC is through USB/Flash drives.

Common viruses such as 'Ravmon' ,
'New Folder.exe', 'Orkut is banned' are spreading
through USB drive .

Most anti virus programs are unable to
detect them and even if they do, in most
cases they are unable
to delete the file, only quarantine it.So in
This tutorial I am going to teach you how  to delete this type of virus from your computer without using any antivirus software.

Step 1:

Click on start menu go to all program click on accessories under accessories right click on command prompt click on run as administrator.

Step 2:

Select an affected drive e.g drive C:, F:, D:, etc.

By typing:  cd F:/  and press enter

F:/ is your affected drive.

Step 3:

type attrib -s -h *.* /s /d then press enter.

STEP 4:

type 'dir'
the dir command shows you the
content of the drive.

STEP 5:

check if there is an unusual .exe file
if there's an autorun.inf file
rename it
( rename filename.extension
new filename ).

STEP 6:

by doing all of the above steps you can now access the drive without affecting the virus Go to my computer.

STEP 7:

Select the drive and delete the harmful files from the drive e.g auto run.inf or you can delete it using your cmd by typing: del autorun.inf syntax of this command is del file name extension.

Read More

Mozilla Firefox Tips

Mastering your web browser will make your work easy, many people they think surfing internet through web browser is just a typing a URL in address bar. If you are one of them let me tell you, there are a lot of tips that you need to know, and here I compiled some for you. This tips will help you even if you a web designer.

Send a web page to a friend
When visiting a webpage you found a very interesting page and you want to share the page to your friend and that page it doesn't have send to a friend link. Following the below simple steps can allow you to send a link to him via email.

In your Firefox browser

- Right-click on the you want to send.
- In the menu option click Send link.

Shortcut key to get into address bar
Quickly get into your address bar will save you a time, sometimes you are at the bottom of the webpage and you want to visit another website I know how scrolling to the top is bothering you. That is why I  wrote this process for you. Without wasting your time just press Ctrl + L
in your keyboard that's all.

Move back faster in your Firefox
The most commonly used feature in Firefox is back button. To use this feature either click on the small down arrow next to back buttons or hold the back button down.

Holding The back button down or click the down arrow shows the most recent pages you have visited and allow you to go back to the page of your choice.

Hide and show Firefox download window
To hide this window that appear while you are downloading in Mozilla Firefox. Edit the about:config settings as shown below to disable this window from displayed for you.

1. Open a new tab in Firefox
2. In your address bar type: about:config
3. Locate browser.download.manager.showWhenStarting by copying and pasting the bold text into the Filter box.
4. Double-click the name or value to change the value from True to False. Once you finished close the tab.

To show a hidden download window
Click on Tools > Downloads or by pressing Ctrl + j from your keyboard.

Save any type of media on a web page

Note: this doesn't work all media because of how website it is programmed like YouTube videos.

We all love media files sometimes you will come across the media file that you want to download here is what you will do to quickly save any media including embedded content to an alternate source by right-clicking on a page click "View Page Info", click the media tab, locate the media file you want to save and click the Save As button. 

Make Mozilla Firefox window full screen
To make your Mozilla Firefox window full screen without the toolbars press the F11 key. To restore it again press F11.

Print only sections of a web page
To print only a one section from a web page this will save your printer ink, to do this highlight portions of text you want to print and click the print icon  or press Ctrl + p in the printer dialog window under Page Range choose the option selection.

Read More

How To Check if A Windows Operating System (OS) is 32 - Bit or 64 - Bit

Sometimes people are confusing about what type of OS they are running on their computer, it is very important to know the OS type you are using for example you want to download software from internet and they give you to options one for 32bit and other 64bit.
So what are you going to do are you going to guess or you will look for someone to do it for you, the thing that even a kid can do it, it is embracement.

So today we are going to discuss about a simple way to do this no software required, it is only your brain and 5minutes from your time.

Just read this step below and find out.

Step 1:
Click on start Menu

Step 2:
Under a start menu click on My Computer or press windows trade mark + E on your keyboard.

Step 3:
System dialog will appear for you.

Step 4:
Inside system dialog take a clear look  you will see something
Like this
System Type: 64-bit or 32-bit.

That is it if you see 64-bit Operating System, x64-based processor that is mean you are running windows 64 operating system based on x64 based processor.

If you found this post useful please share it to your friends.
If you found any difficulty don't forget to leave me a comment I will help you.

Read More

How to use Whatsapp on Computer Using Airdroid

Whatsapp is an instant messaging app for smart phones that operates under a subscription business model. The whatsapp enables users of selected phones to use the internet to transmit communication.
In addition to text messaging,  whatsapp can be used to send images, video and audio media messages.

However, Whatsapp is only available for mobile platforms like Android, iOS, Windows phone, Symbian and Blackberry. Although WhatsApp has not been created for PCs, there are ways to run it on PC and use it.

If you want to use whatsapp on computer there is a lot of waus , but today I am going to discuss this one it is Airdroid. Airdroid allows users to connect and control their Android devices from their browser. It is more than that it allows you to connect to your Android device over the network to control files, music, photos, video, apps, and even contacts.

1. Download and install AirDroid on your Android phone

2. Sign in into the app or Sign up with a new account.

3. Once you’ve signed in, the app will ask you to enable real time notifications on your PC. Tap on ‘Enable’ button.

4. Enable the Android Notification Mirror feature.

5. Now head over to the www.airdroid.com and download the respective Airdroid client for your
Mac os or Windows PC from the download links provided.

6. Install the application on your computer.

7. Sign in to your AirDroid account using the same username and password that you used to sign up on your Android phone.

That’s all! Now whenever you receive Whatsapp’s message on your Android phone, the same message will be also displayed on
your PC in real time. Click on the message notification to reply.

Please note that you should have your Android phone and PC connected to the same network
to get notifications.

Read More

How to change your friend computer without old password

This tutorial is very easy and funny, I don't know why Microsoft leave this vulnerability in windows 7.

I have used this trick on many computers and all of them is work perfectly, but make sure you didn't do on the computer that you don't have access to it, because it will lead you to jail.

This tutorial is required a basic command prompt command or never run a command prompt before.

Command Prompt: Command Prompt is a command line
interpreter application available in most Windows operating systems. you can perform alot of windows operation in cmd if you know there command.

Let us back to our tutorial Here we go:

Step 1:
Click on start menu and then click on All Program.

Step 2:
On All program item click on Accessories under accessories you will see command prompt.

Step 3:
Right click on Command Prompt click Run as Administrator a black screen will appear for you.

Step 4:
Inside that black screen type the following command:

net user yourComputerName new password.

E.g

net user alkasima 1234567

I wish you best luck thanks for reading this post.

Read More

Simple way to Hack windows 7 password

Forgetting your password is not a new problem, many people they have many things in their life so they are easier to forgot there password, but luckily there’s a really easy way to reset the password.

All you need is a copy of the
Windows 7  installation disk and one simple command line trick.

Resetting Your Forgotten Windows Password are follows below:

Boot off the Windows disk and select the

“Repair your computer” option from the lower left-hand corner.

Follow through until you get to the option to open the Command Prompt, which you’ll want
to select.

First you’ll want to type in the following command to backup the original sticky keys file:

copy c:\windows \system32\sethc.exe c:\

Then you’ll copy the command prompt
executable (cmd.exe) over top of the sticky.

keys executable:
copy c:\windows
\system32\cmd.exe c:\windows
\system32\sethc.exe

Now you can reboot the PC.
Resetting the Password
Once you get to the login screen, hit the Shift key 5 times, and you’ll see an administrator mode command prompt.

Now to reset the password—just type the following command, replacing the username
and password with the combination you want:

net user yourComputerName your newPassword.

E.g net user alkasima 1234567

That’s all there is to it. Now you can login. Of course, you’ll probably want to put the original sethc.exe file back, which you can do
by rebooting into the installation CD, opening
the command prompt, and copying the

c:\sethc.exe file back to c:\windows
\system32\sethc.exe.

If you found this tutorial useful please me a comment

Read More

How to use Google To Repair A PC

To use Google to repair a computer is simple as ABC if you can read this tutorial throughout. Sometimes a small problem can cause a computer error, which can be repair in a small time or effort instead of for you to repair it you take it to the repair shop which is lead you to spend a hundred dollars. Let me tell you one thing must of the repair shop in your local they use Google to repair a system why not you cannot do it maybe because you didn't read my post before. But for now I believe after you read this post you will hate yourself for what you did.
Don't say why I said this I know you are doubt now OK let me remove this doubt from you.

Just follow this simple steps

Step 1
identify your problem:
What I mean with these take note of the problem you encounter in your system.
Example:
Let say your computer there is not sound.

Step 2
We take example of having no sound in computer let us see.
Goto Google and type "How to fix a computer sound problem" By typing this you will get thousand of result that you can use to repair your system.

Step 3:
Make sure your problem is fixed if not try another phrase e.g "window 7 no sound" you will see alot of result with different solution.

By following the above procedures I hope you can troubleshoot many computers in your locale, Thanks for reading my post I hope you enjoy it don't forget to leave a comment.

Read More

Setting Up An Email Account Using Outlook Express

Today I am going to teach you how to set up an email Account using Outlook Express the most popular Email software.
Your Internet Service Provider has probably
given you the option to set up more than one
email address. Most come with at least five. So
you're not limited to just the one. So if someone want you to configure his/her own after reading this post you should be able to do it.

To set up an email address, make sure you are
looking at an Outlook Express screen and not a
New email screen. Then do the following.

1. From the menu bar, click on Tools
2. From the drop down menu that appears, click
on Accounts (one click, left mouse button)
When you click on Accounts, you get the
3. Internet Accounts dialogue box popping up.

4. Click the Mail tab at the top to see the

following:
The Mail tab shows you all the email accounts
that you have set up. In above, there
are no email accounts set up yet. To set up an
email account, do the following:

1. Click on the Add button in the top right hand
corner
2. A popup menu appears
3. Click Mail with your left mouse button
4. When you click on Mail, you get an Account
5. Wizard popping up, which will ask you a series
of question.

When the Wizard start:

1. Type in a name you want for display purposes.
You can type in anything you like here. It
doesn't really matter because Outlook Express
will completely ignore the name you pick!

2. Click the "Next" button when you're done. The
screen will change:

You need to type in an email address. Type in
the email address you got from your Internet
Service Provider.

- Once you have entered the email address, click Next.
You'll get the another screen let me break it
down.

Your Incoming mail server is probably a POP3
one, so leave the drop down box as it is. The
first text box is Incoming mail (POP3, IMAP or
HTTP) server . You can usually get these details
from your Service Provider's homepage. But
yours will probably be a POP or POP3 address.
This is a method used to receive emails. The
format to type into the text box is this
                  pop.provider.com
So if your Service Provider was Home and
Learn, you'd enter this
                           pop.go4techblog.blogspot.com

The next text box to fill in is "Outgoing mail
(SMTP) server". SMTP is the method used for
sending emails. The format to use is

                  smtp.provider.com

So if your Service Provider was Home and
Learn, you'd enter this

         smtp.go4techblog.blogspot.com

we have entered some
fake POP and SMTP details

- Click the "Next" button at the bottom when you
are finished

- The next screen will appear:

- The Account name is the one you got from your
Service Provider. They might have given you a
password, too. If they did, enter your Password
in the text box. Unless your Service Provider
has told you otherwise, DON'T put a tick in the
box for Log on using Secure Password
Authentication .

- When you're done, click the "Next" button

- There's nothing left to fill in, and you are invited
to click the Finish button. Click the Finish
button and you'll return to the Internet Accounts dialogue box
Your new Account will be there:

The Account name is a bit messy. Outlook
Express has simply taken the name of the
Incoming Server -
pop.type_your_isp_here.com . To change this
to something more memorable, click the
Properties button to the right, or simply double
click the name of your account. You'll see a
dialogue box:
Delete the text at the top, the one the one in the first field of dialog box Then type something of your
own:
Click OK and you'll get back to the Internet
Accounts screen. You should see your new
name appear, under Account:
When you're done, click the Close button on the
Internet Accounts dialogue box. You'll be taken
back to the main Outlook Express screen. To
check if the account has been set up, we can
click on the Send/Recv icon in the main Outlook Express screen.
As you can see, your new account has been
added at the bottom. It was a success!

I hope you enjoy this tutorial if you have any questions don't forget to leave me a comment.

Read More